Emission Gas Cleaning

DH 2100-CE
The DH 2100 - CE (T 100) is a vane type mist eliminator used for many applications with horizontal gas flows. The vane is suited for low to high gas velocities and eliminates very fine droplets. This vane type separator can be configured to most individual performance demands using various pitchesand it provides energy saving operations due to the very low pressure loss.
» Read more
DS 8200
The DS 8200 avoids stack rain efficiently. It is a spin vane separator removing droplets out of both - vertical and horizontal - gas flow directions. It removes a coarse particle spectrum, thus it can handle gas flows with plugging risks.
» Read more
DS 8300
The DS 8300 avoids stack rain efficiently. It is a spin vane separator removing droplets out of both - vertical and horizontal - gas flow directions. The equipment has specially been designed to separate larger amounts of coarse droplets from gas streams in higher gas velocities.
» Read more
DV 210+ Design I
Design I – The classical design. One single stage or 2 superposed V shaped units on 2 support layers. Flushing systems are installed on either up- and/ or downstream side of the misteliminators.
» Read more
DV 210+ Design II
Design II – Better usage of washing liquids. Two superposed units with 2 counter oriented V shaped units. The washing liquid of the upper stage drains through the lower level, thus a better usage of the washing water is achieved. Less installation height is needed than for Design I.
» Read more
DV 210+ Design III
Design III – Minimized height and single support beam layer. Two superposed units forming a diamond structure.
» Read more
DV 270
The DV 270 (T 271) droplet separator is a vane type separator for vertical flow. Used in many different applications the DV 270 became the so called 'all-rounder'.
» Read more
DV 880 vane type mist eliminator vertical flow
The DV 880 mist eliminator is a vane type separator for vertical gas flows. The DV 880 is typically used as 2-stage mist eliminator for medium to high liquid loadings, but it can also be applied to low liquid loads.
» Read more
 
  • Munters AB | Isafjordsg 1, Kista Entré | P.O. Box 1188 | S-164 26 Kista| Sweden | Reg no 55 60 41 - 06 06 | © Munters 2011